03.10.2019
GIS 2019
GIS, the Italian access and lifting show was opened today by the Mayor of Piacenza, Patrizia Barbieri. This the seventh GIS event held at the Piacenza Expo and is the largest yet with over 400 exhibitors - Pam Penny reports with a selection of photographs from the event:
Please register to see all images
(L-R) Fabio Potesta of GIS, Patrizia Barbieri, Mayor of Piacenza, and Giuseppe Cavalli of Piacenza Expo
Please register to see all images
Socage design engineer Simone Compagnoni with the prototype of the company's first Rough Terrain crane, the 45 tonne Optimus 450
Please register to see all images
Zoomlion's first crane produced in Italy, the three axle 60 tonne ATC960 prototype
Please register to see all images
Comet's new 16 metre 16.75 HQ truck mounted platform, providing 7.5 metres of outreach
Please register to see all images
Gabrielle Valli at work on the Comet stand
Please register to see all images
Tadano and Demag stand side by side
Please register to see all images
Two Tadanos and a Demag
Please register to see all images
CTE's new 20m Zed 20 with 'H' outriggers with 25m Zed 25 behind
Please register to see all images
The new CTE Zed 20 features fixed 'H' type narrow width outriggers
Please register to see all images
The show includes more than 400 exhibitors
Please register to see all images
Pierino Bravi demonstrates the Sprint TL Tyre Lift, which is now in production
Please register to see all images
The Airo stand
Please register to see all images
Airo launched its new A18 JRTD Xtreme articulated boom lift
Please register to see all images
The JMG stand
Please register to see all images
The 50,000 t/m JMG 50000RE - a Cormach 7F134 ASC heavy duty articulated crane on an electric powered JMG industrial chassis, for machinery installation work
Please register to see all images
The Jekko MPK 06 glass handling robot/lifter
Please register to see all images
Palazzani's 37 metre XTJ 37+ spider lift
Please register to see all images
A Palazzani 2000 glass handling robot/lifter
Please register to see all images
A selection of telehandlers
Please register to see all images
The always impressive Liebherr stand
Please register to see all images
The Genie stand focused on its new XC models - that is a CTE spider in front
Please register to see all images
The JLG stand had a wide selection of its product range
Please register to see all images
The Dalbe tower crane stand
Please register to see all images
The tracked base of the Palfinger PCC 115.002 articulated spider crane
Please register to see all images
The Palfinger PCC 115.002 crane
Please register to see all images
Sennebogen focused on its tele crawlers
Please register to see all images
The Multitel Stand
Please register to see all images
The Multitel MJ450 sold to Bettarini
Please register to see all images
Grove GRT655L Rough Terrain crane
Please register to see all images
Haulotte attending a regional show - with its new Pulseo booms
Please register to see all images
Taking a little time out on the stand of fork lift specialist Heli Italia
Please register to see all images
The Socage stand was a popular destination
Please register to see all images
A six tonne Ormig model 55 from 1980 loaned from the Vernazza fleet to celebrate 70 years of Ormig
Please register to see all images
Both cranes and access equipment were in abundance
Please register to see all images
Italian rental company Cofiloc showed hoists and aerial lifts
Please register to see all images
The Imer stand with its full range of scissor lifts
Please register to see all images
Platform Basket
Please register to see all images
The new Almac 990kg tracked self levelling carry deck crane - Multi-loader 6.0
Please register to see all images
Genius showed its pedestrian tunnels and low level lifts
Please register to see all images
Socage 164 pick up mounted platform
Please register to see all images
There was also a military presence at the show
Please register to see all images
The Omar Crane stand
Please register to see all images
A 1982 scooter-truck mounted Ippis di D.Giora 11m fire ladder, initially used for street light maintenance
Please register to see all images
The Easy Gemini 720 truck mounted double electric scissor lift
Please register to see all images
Willem Hilderink of IPAF smiling as always
Please register to see all images
The PowerPicker from Power Towers on the JLG stand
Please register to see all images
Simone Scallabrini of BG Lift/Cela (L) with Johan van Der Sanden of dealer Sankoo
Please register to see all images
Cela platforms on display
Please register to see all images
A busy TVH stand
Please register to see all images
Amanda Long (L) and Christina Lanham from ITI virtual reality simulations
Please register to see all images
The Fiat Ballila was owned by Ermete Vernazza, the company founder of Autogru,
Please register to see all images
Lodax launched a number of new products at GIS including its Bridgemat and Incline Pads
Please register to see all images
Angelo Cosmos and Valentina Chiarotto of Terex Cranes
Please register to see all images
Vermitac's stand
Please register to see all images
The Sinoboom's stand
Please register to see all images
The Magni / Dingli stand
Please register to see all images
CMC focused on the new 23 metre S23 spider lift with 12.4 metres of unrestricted outreach
Please register to see all images
Bronto's 56 metre truck mounted platform
Please register to see all images
Merlo stand stacked with telehandlers
Please register to see all images
Dante Fracca of Hinowa and Ebbe Christiansen of Reachmaster having a catch up in front of the Ormig stand
Please register to see all images
Cela DT30 spider lift with new Euro 5 Hatz diesel and fully integrated DPF filter
Please register to see all images
A Valla crane sold to a customer in Finland
Please register to see all images
GSR truck mounted platform
Please register to see all images
A big Omas wrecker truck
Please register to see all images
The Hinowa team happy as ever
Please register to see all images
The Mantall stand
Please register to see all images
Terex Rough Terrain cranes
Please register to see all images
Paul Brown (L) back in action on the Tadano stand
Please register to see all images
XCMG's stand its new dealer HItex
Please register to see all images
Palfinger's 103 metre truck mounted platform got plenty of attention
Please register to see all images
The 70 metre truck mounted Horyong PE700 furniture lift sold by CEM Elevatori to Russo Traslochi
Please register to see all images
The machine will lift up to 400kg to a height of 70 metres
Please register to see all images
A choir and small orchestra provided a stunning setting int a Piacenza square for the pre award dinner entertainment
Please register to see all images
The Italian Lifting & Transportation awards dinner
Please register to see all images
Three gala dinners were held, one each night this one being the crane and heavy transport award dinner
Please register to see all images
The GIS organising team take a well deserved bow
Comments